线缆管廊密封防水组件@集团有限公司
防水组件由UPVC止水套管、可调径密封件和压紧单元组成，广泛应用于地铁，综合管廊，核电厂等地下工程项目。GLM系列产品设计精巧、结构合理、便于安装、易于拆卸。可以满足多种线径，数量的电力通信线缆灵活穿引。在解决密闭、防水、抗干扰、抗震动、防磁、防辐射的同时能保证线缆的完整性。
The waterproof component is made up of UPVC sealing sleeve, adjustable diameter sealing member and pressing unit. It is widely used in underground engineering projects such as subway, comprehensive pipe gallery, nuclear power plant and so on. GLM series products are exquisite in design, reasonable in structure, easy to install and easy to disassemble. Flexible wire communication for electric power communication wires with multiple wire diameters and quantities. To ensure the integrity of the cable when solving closed, waterproof, anti jamming, anti vibration, anti magnetic, radiation energy.
UPVC套管市政地下综合管廊工程预埋件，设计止水防渗结构，具有很好的防磁、防腐蚀、耐老化性能，套管的两端设有防尘盖 。其管径有DN500 、DN300、DN200、DN110四种，长度从250-650mm依据综合管廊墙体宽度而定制。
UPVC casing special municipal underground pipe gallery project design of embedded parts, waterproof structure, has good antimagnetic, anti-corrosion, anti-aging properties, both ends of the sleeve is provided with a dustproof cover. Its diameter is DN500, DN300, DN200, DN110 four kinds, length from 250-650mm comprehensive pipe gallery wall width and custom.
可调径密封橡胶高度为30-120mm，密封模块内外径：R10-30mm，R20-40mm，R50-100，R90-150等，可根据实际要求选择；变径皮层厚为0.6mm ,0.8mm,1.0mm, 1.2mm等；压紧单元金属紧固件和隔层板的材质SUS304和SUS316可以选择。
Adjustable diameter seal rubber seal height 30-120mm, diameter: R10-30mm, R20-40mm module, R50-100, R90-150 etc., can choose according to actual requirements; reducing cortical thickness is 0.6mm, 0.8mm, 1.0mm, 1.2mm, SUS304 and SUS316; the material pressing unit metal fasteners and plate can be selected.
GLM系列防水密封组件安装说明：
GLM series waterproof sealing assembly installation instructions:
首先，依据线缆直径剥除可调径密封圈内多余层橡胶，模块开口对压线缆后平装推进密封组件套管内，间隙不宜超过2MM，否则影响密封效果。然后，用分体式卡套压紧固定；整理收紧线缆，拧紧加压单元内六角螺丝，使橡胶压缩彭胀达到密封防渗性能。
First of all, according to the diameter of the cable, the rubber in the adjustable diameter seal ring can be stripped out, and the gap between the module opening and the sealing sleeve of the push sealing component of the pressed cable should not exceed 2MM, otherwise the sealing effect will be affected. Then, it is pressed and fixed with a split type card sleeve; finally, the cable is tightened and tightened, and the six angle screw in the pressurizing unit is tightened so as to make the rubber compress and expand to reach the sealing and anti-seepage performance.
